News Center – Laserion Photonics Technology Co., Ltd

What Is a Single-Frequency Narrow-Linewidth Laser Used For in Quantum and Spectroscopy Labs?

Laserion 2026年7月24日 No Comments

Not every “specialty laser” in a research catalog is the same instrument wearing a new label. “The purchase request said ‘specialty ultrafast laser’ because that was the language every vendor…

What Should Research Labs Ask Before Specifying a Specialty Ultrafast Laser Source?

Laserion 2026年7月23日 No Comments

The most expensive mistake in a specialty RFQ is asking the wrong first question. “The RFQ opened with ‘shortest femtosecond, highest peak power’ because that language felt safe for a…

How Do You Compare Industrial Ultrafast Laser Suppliers Beyond Peak Power on the Datasheet?

Laserion 2026年7月22日 No Comments

The loudest number on an ultrafast datasheet is often the least useful one in production. “The shortlist was sorted by peak power. The highest-peak femtosecond option looked safest for alumina…

Does Higher Throughput Always Compromise Precision in Semiconductor Laser Processing?

Laserion 2026年7月21日 No Comments

Speed gets the blame for almost every precision failure in laser micromachining. Push the repetition rate higher, the reasoning goes, and thermal accumulation builds, the HAZ widens, kerf edges chip,…

What Laser Source Parameters Determine Wafer Marking Quality and Throughput?

Laserion 2026年7月20日 No Comments

The first question every process engineer asks when specifying a laser source for wafer marking is: which wavelength? It feels like the safe, technically defensible starting point. Shorter wavelength means…

How to Eliminate Micro-Cracks in Ultrafast Laser Cutting of Brittle Materials?

Laserion 2026年7月17日 No Comments

When brittle materials like cover glass, sapphire, or quartz fracture during laser cutting, the instinct is almost universally the same: dial back the power. Engineers meticulously reduce single-pulse energy, convinced…

How to Achieve High-Contrast, Zero-Damage Laser Marking on Consumer Electronics Components?

Laserion 2026年7月16日 No Comments

When manufacturing consumer electronics, the assumption is that “zero damage” means minimizing laser power. We see engineers constantly dialing back the power on their nanosecond fiber sources, terrified of burning…

Peak Power vs. Average Power in Ultrafast Lasers: Balancing Throughput and HAZ

Laserion 2026年7月15日 No Comments

To double the output of an alumina dicing line, the math seems dangerously simple: double the laser’s average power. If 50 watts gives you X parts per hour, then 100…

How UV Lasers Prevent Delamination in PCB Cutting

Laserion 2026年7月14日 No Comments

When micro-delamination appears on the cut edge of a flex PCB, the immediate instinct of any process engineer is to dial down the pulse energy. The prevailing assumption is that…

High-Power Picosecond Lasers: Why <1% RMS Stability is the True Metric for 24/7 Production

Laserion 2026年7月13日 No Comments

The night shift is where laser lines go to die. During the day, engineers monitor the process, tweak parameters, and keep the yield numbers looking acceptable. But at 2:00 AM,…

Archives

Contact Us